How to Repair your Computer Monitor when Liquids ruin

Accidents can happen on computer monitors. Liquids can ruin your computer monitor permanently. But if you act quickly and take a few important steps, you can repair your wet computer monitor yourself.

Accidents can happen on computer monitors. Liquids can ruin your computer monitor permanently. But if you act quickly and take a few important steps, you can repair your wet computer monitor yourself. The process involves drying the wet parts of your computer monitor and putting the pieces back together, as they were originally. Firstly,turn off your computer and monitor,unplug everything and disconnect all wires with power.Find all screws on your wet computer monitor and slowly and carefully unscrew them, taking care not to strip them. If there are no screws, carefully pry the screen of the monitor from the rest of the unit with a screwdriver, so you can get to all of the inside electricals. http://www.papatek.com/LCD%2DPanel/ Then,look for all the wet parts of your computer monitor. Remove all wet or damaged parts and set them in a safe place.Dry the wet parts of your computer monitor slowly with a hair dryer. Do not hold the dryer too close; it may damage the parts. Do this for a few minutes, until the parts appear to be dry.Pat the parts with a paper towel to grab any leftover moisture and wrap the parts up. Let the parts sit for about a day. Some parts may take longer, so be patient.Replace any computer monitor parts that are beyond repair. Do not try to reuse them, as this may cause more damage to your monitor. You may find computer monitor parts from computer specialty stores. Put your computer monitor back together. When reinstalling the screws and parts, make sure you work slowly and carefully to avoid damage. If still with problem,you can buy a new one from http://www.papatek.com/LCD%2DPanel/